top of page
P-I-M-P Stick Labels (Heading Only).png

​

Proud Supporter of PYROJAM Events (www.pyrojamusa.com)

and Sponsor of PASSFIRE MAXIMUM LOAD (www.passfiremovie.com)

​

A Brief History ...

 

In 2017, we started to develop our own sparkless awl tools to support
the pyrotechnics industry in the safer preparation of using electronic matches,
initiators, and for custom fusing applications.

​

After an initial release sent to some of the top pyrotechnics users, suppliers, and supporters,
we took their feedback and went back to make some improvements in the tool, including
better ergonomics, stronger brass, and a revolutionary custom Pyrobolic[TM] notched tip.

​

With these improvements, these sparkless awl tools, more commonly referred to in the pyro
community as 'pyro pokes', were set to debut for sale the the public.  Being fully hand machined,
sanded, ground, coated, and polished, production was quite limited, but the demand for our
pyro pokes grew, even leading to a limited run fusing set, developed by popular demand.

​

AND NOW, we present our 3rd generation of pyro pokes,

the Pyro Inspired Multi Pokes, abbreviated as P.I.M.P Sticks!
With further feedback from the pyro community as well as tooling experts, we have
retained our great features, as well as made some amazing new improvements.


SPONSORSHIP & SUPPORT

​

We proudly sponsor the movie Passfire Maximum Load,
an amazing celebration to so much of the pyrotechnics industry and celebrations.
Please check out more about the full amazing series at: www.passfiremovie.com

​

We also support PyroJam USA, a massive fireworks competition
bringing professional displays from all over the world.

Please check out more about this event and the amazing IPC team at: www.pyrojamusa.com


Superior Construction ...

 

All of our pyro pokes and fuse forks are fully hand tooled, machined, and assembled,
with quality checks being done at each step to best ensure the finest quality in our products.

​

Each of our fine, personally crafted tools contains the following most desirable features:

​

  • Weather resistant ergonomic handles (molded plastic mains, and coated wooden secondaries)
     

  • Our unique Pyrobolic[TM] notched tip on our pyro poke tools, to ease poking and reduce wrist torsion,
    working more like a drill-bit to get through tough cardboard and even many plastic tubes with ease

     

  • Incorporation of anti-spin set-pins in every poke and fork tool, to best ensure brass rods don't come loose
     

  • Narrowed sides of our beveled pyro poke fuse forks, to most easily and quickly insert fuse into poked holes
     

  • Inset tool sets where the secondary poke/fork fits within the main poke, reducing storage space
     

  • Color-coded butt-ends of the poke sets to easily identify tool pairs (red for matching, blue for fusing)
     

  • Exclusive use of sparkless C360 brass, known for its strength and resistance to corrosion
    with properties closely resembling that of steel


Current Offerings ...

e-Matching Poke (single item)
Used in preparing items for using common or
home-made e-Match, or Firewire Initiators
 

E-Match Only - ALL VIEWS.jpg
Fusing Set.png

Custom Fusing Set
Used in preparing or customizing items for using
common visco 'cannon'-type or home-made fuse

 

Fusing Features.png

Specifications of the e-Matching (single)
sparkless awl pyro pok
e:

e-Matching Poke:

  • Blade:
    C360 sparkless brass
    1/4" diameter (.635 cm)

    3" length (7.62 cm)

  • Handle:
    Contoured ergonomic, hard plastic
    Inset c
    omposite cork (holds secondary poke)
    4" length (10.16 cm)

  • Overall:
    7" length (17.78 cm)
    2.3 ounces weight (65.2 g)
    Best used for poking holes for inserting shrouded e-Matches and Firewire Initiators.

     

​

Specifications of the Custom Fusing Set

sparkless awl pyro poke & fuse fork:

Main Fusing Poke:

  • Blade:
    C360 sparkless brass
    5/32" diameter (.397 cm)

    3" length (7.62 cm)

  • Handle:
    Contoured ergonomic, hard plastic
    Inset composite cork (holds secondary poke)
    4" length (10.16 cm)

  • Overall:
    7" length (17.78 cm)
    1.8 ounces weight (51.03 g)
    Best used for poking holes for inserting up to 3mm strands of common visco 'cannon'-type or home-made fuse.

     

Secondary Fork Poke:

  • Blade:
    C360 sparkless brass
    5/32" diameter (.397 cm)
    3" length (7.62 cm)

  • Handle:
    Contoured ergonomic, coated wood
    3.5" length (8.89 cm)

  • Overall:
    6.5" length (16.51 cm)
    1 ounce weight (28.35 g)
    Best used for seating up to 3mm strands of common visco 'cannon'-type or home-made fuse into poked holes, and for pushing same fuse types into roman candle bore holes.


Full Fusing Set (when inserted together):

  • Overall:
    10.5" length (26.67 cm)
    2.8 ounces weight (79.38 g)


NOTE:  All measures are approximate; due to manual tooling and pre-coated materials, variances in dimensions or appearance
can occur in each tool, and does not impact performance.

 

E-Match Only - Perfect for e-Matches with Shroud.jpg
Pyrobolic TM (Feathered).jpg
Fusing Set - Storage.jpg
Poke-n-Fork TOP.jpg
Poke-n-Fork SIDE.jpg

AVAILABLE NOW on eBay, please click the link below for pricing options and availability ...

CLICK HERE TO BUY NOW -- or first watch the demo videos below ...




Pyrobolic [TM] Tip Demo Video
(Manual Link: https://youtu.be/PgJfkdFyiXo)


 



E-Match Set Demo Video
-NOTE: now only a single poke-

(Manual Link: https://youtu.be/UYqF7MwQitc)
 



Fusing Poke and Fork Set Demo Video
(Manual Link: https://youtu.be/JhN_MPppq0Y)

Proudly-Made-In-USA.jpg

AVAILABLE NOW on eBay, please click the link below for pricing options and availability ...

CLICK HERE TO BUY NOW -- Thank You for checking us out!

If you have any questions about our products,
or would like a quote on custom or bulk orders,
please contact us via email at:

info@pyropoke.com

 

bottom of page